Products

Inconel is a family of austenite nickel-chromium-based superalloys.[1] The name is a trademark of Special Metals Corporation, a wholly owned subsidiary of Precision Castparts Corp.[not verified in body]

Inconel alloys are oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel's high temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy.

Inconel alloys are typically used in high temperature applications. It is sometimes referred to in English as "Inco" (or occasionally[not verified in body] "Iconel"). Common trade names for Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 and Nicrofer 6020.

Properties
Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. When heated, Inconel forms a thick and stable passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally induced crystal vacancies (see Arrhenius equation). Inconel's high temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy. In age-hardening or precipitation-strengthening varieties, small amounts of niobium combine with nickel to form the intermetallic compound Ni3Nb or gamma prime (γ'). Gamma prime forms small cubic crystals that inhibit slip and creep effectively at elevated temperatures.[10] The formation of gamma-prime crystals increases over time, especially after three hours of a heat exposure of 850 °C, and continues to grow after 72 hours of exposure.

Manufacturer of Inconel Alloy Rods, Bars & Wires

Mukesh Steel India has Inconel which is a nickel-chromium alloy utilized for applications that require erosion and high temperature resistance. This nickel alloy was intended for service temperatures from cryogenic to elevated temperatures in the scope of 2000° F. It is non-attractive, has fantastic mechanical properties, and presents the alluring blend of high quality and great weldability under an extensive variety of temperatures

Specification

Standard	ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
Grades	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Size	1mm to 200mm diameter
Type	Bars, Rods, wire

Manufacturer of Inconel Alloy Plates & Sheets

Mukesh Steel India offer an extensive variety of Inconel Sheets and Plates. These top quality Inconel Sheets and Plates are broadly prescribed for their high resistance to destructive medium, warmth and anxiety consumption splitting. Our plates are generally utilized as a part of different designing and modern ventures. These Inconel Plates can be modified according to our customers' required details.

Specification

Standard	ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Grades	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750

Value Added Service

Manufacturer of Inconel Alloy Pipes & Tubes

Mukesh Steel India broadens a subjective scope of Inconel Pipes to our customers that is fabricated in consistence with set industry standards. These pipe fittings are made in accordance with the different needs of commercial ventures and are given to them at very high rates. It is highly dependable and shows phenomenal resistance to consumption.

Specification

Grades	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Types	Seamless / ERW / Welded/ Fabricated
Range	15 NB up to 600 NB in SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
Form	Round, Square, Rectangular, Hydraulic etc.
Length	Single Random, Double Random & Cut Length
End	Plain End, Beveled End, Threaded

Applications

Manufacturer of Inconel Alloy Flanges

Mukesh Steel India give the clients an incredible quality scope of Inconel Flanges, which are made from high review quality crude materials. These Inconel Flanges can be customise according to our valuable clients details. These Inconel Flanges are broadly known for its toughness and quality. Our Inconel Flanges can be profited at industrial driving cost.

Specification

Standard	ANSI/ASME B16.5, ANSI B16.47 API, DIN, JIS, BS
Grades	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Size	1/2 inch - 48 inch (15mm - 1200mm)
Types	Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint

Features

Manufacturer of Inconel Alloy Buttweld Fittings

Mukesh Steel India has produced from diverse grades of Inconel, these fittings find broad application crosswise over different commercial industries. Our scope of buttweld fittings incorporate elbow 90 deg, elbow 45 deg, elbows 180 deg, diminishing elbow, tees, crosses and concentric/unusual reducers. Accessible in diverse determinations, we offer these buttweld fittings at the most competitive costs.

Specification

Grades	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Range	15 NB UP TO 600 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
Types	Elbow 90 Deg, Elbow 45 Deg, Elbow 180 Deg, long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, crosses, short/long neck stub-ends

Application

Manufacturer of Inconel Alloy Forged Fittings

Mukesh Steel India offers an extensive variety of Inconel Forged Fittings that are produced from quality quality checked & tested components. Known for its amazing and solidness, these inconel fittings are generally utilized as a part of different commercial industries over the globe.

Specification

Standards	ASTM / ASME SB 564
Grades	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Types	• Elbow - 90 Deg. & 45 Deg • Tee - Equal & Reducing • Union, Cross, Coupling - Full & Half • Socket Reducing, CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, Nipolet

Application

Manufacturer of Inconel Alloy Fasteners

Mukesh Steel India has extensive variety of inconel fasteners includes high mechanical quality, close dimensional resilience and superb wrapping up. These fasteners are straightforward for simple establishment and evacuation. We offer a complete arrangement of clasp including stud screws, hex fasteners, square screws, hex nuts, t-head fasteners and so on. Accessible in diverse evaluations of inconel with changing measurements at the most competitive costs.

Specification

Standard	ASTM / ASME SB 163 / 167 / 517 / 704 / 705
Grades	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Types	Bolts Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolts, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts , T- Head Bolts , Wing Screw , Eye Bolt , Eye Bolt, Foundation Bolts, Structural Bolts.

Features